长篇乱超级好看伦小说最新章节目录_长篇乱超级好看伦 ,迅雷资源搜索最新章节列表_迅雷资源搜索无弹窗

发布日期:2021年11月30日
PTFE Dip Pipe Fittings

Fixed Dip Pipes

Description

Fixed Dip Pipes are fairly rigid, thick wall PTFE tubes, either straight or 90˚ elbowed, which are directly crimped to the end of Pharmaline N hoses. They are designed for insertion into drums, tanks and reaction vessels in order to suction drain (or inject) process fluids transferred through the hose.

Materials

  • Standard dip pipes are in anti-static (AS) PTFE
  • Ferrules, most in Grade 304 SS, some sizes in Grade 316L SS 

How to order

Specify the size and material of the dip pipe, whether it is straight or 90˚ elbowed. Give the length of the straight leg of the dip pipe and the length of the rest of the hose assembly separately.

Maximum Working Pressures

Dip Pipes are normally only tested to 6 Bar Pressure, and are not suitable for use at pressures higher than 3 Bar. They are usable at negative pressure up to -0.9bar vacuum.

If higher pressure ratings are required, consult Aflex Hose.

Lengths

Dip Pipes are supplied as standard in 1 metre straight lengths, but can be supplied in any length to individual requirements.

 

Fixed Dip Pipe (90˚ Elbow)
Fixed Dip Pipe (90˚ Elbow)
Fixed Dip Pipe (Straight)
Fixed Dip Pipe (Straight)
Nominal Hose Bore SizeApproximate Dip Pipe Dimentions
Outside Diameter DInside Diameter I
inmminmminmm
3/4200.87220.5113
1251.14290.8321
11/2401.54391.0027
2502.17551.5840

 

Detachable Dip Pipes

Description

As Fixed Dip Pipes above, but connected to the hose through an end fitting, not by crimping direct to the hose.

Design

A straight, or 90˚ elbowed anti-static PTFE Dip Pipe, fitted with a Flange or Cam & Groove Male PTFE Lined & Flared end fitting.

The most usual end fitting is a Cam Male (as shown), so the dip pipe can then be connected to a hose with a Cam Female end fitting.

Specifications

As above for Fixed Dip Pipes

Detachable Dip Pipe
Detachable Dip Pipe